Fleck 5000 ProFlo SXT 3/4" Electronic Meter

Simple, reliable, and easy-to-use, the NEW Fleck 5000 ProFloSXT Electronic Meter-Demand Valve is the newest version of one of the most popular systems used throughout the world today.

The Fleck 5000 ProFloSXT series is also built for higher flow rates and less pressure drop when compared to the 5600SXT.

The 5000 ProFloSXT series will also refill your salt tank using conditioned water, which will help to prevent costly service and repair, especially on iron-bearing water.

Advanced technology for advanced performance! The newest version of the rugged, time-tested Fleck 5000, the 5000 ProFloSXT gives the user the benefit of unique programming and diagnostic features previously unavailable on the previous 5000SE.

One key NEW feature is the on-board capacitor, which keeps the correct time during a power outage for up to 48 hours! You may also program the system's regeneration sequence individually to maximize efficiency and keep water use to a minimum. Also, the system keeps time electronically, so the drive motor only runs during regeneration, saving the possibility of motor burn-outs, and running more reliably.

The 5000 ProFloSXT Electronic Meter-Demand system can cut salt and water use by as much as 40%! Unlike timer-based systems, the meter-demand system regenerates only when necessary. Coupled with fully-programmable regenerations, the 5000 ProFloSXT can achieve even greater performance. The end result? Significant savings in both water and salt.


The following components are included with our Water Softeners listed below:
(unless otherwise specified)
  • Specified size standard or optional Vortech resin tank
    • 1.05" riser tube
    • Top distributor basket
    • Specified amount of High Capacity resin (with optional resins available)
  • Fleck 5000 ProFlo SXT Electronic Meter Control valve with your choice of one of the following Fleck valve connections:
    • 3/4" or 1" Noryl Yoke
    • 3/4" or 1" Stainless Steel Yoke
    • 3/4" or 1" Noryl Bypass Valve with Yoke
    • 3/4" or 1" Stainless Steel Bypass Valve
  • Brine Tanks:
    • 15" x 17" x 36" Rectangular or 18" x 33" Round
    • 11" x 11" x 38" Square is available for softeners less than 48,000 capacity
    • Salt grid
    • 2310 float assembly and safety overflow
    • 4' Fleck valve-to-brine tank tubing
  • These items are not included with our Water Softeners listed below:
    • Plumbing pipe and fittings to and from the water softener
    • 1/2" inside diameter drain line that runs from the water softener to your house drain
    • Softener salt that would be purchased locally
There are currently no products in this category.